Formwork accessories
The tie bar system
Produced from high tensile steel with a screw thread (deformation conforming to ASTMA 618 for reinforcing steel bars).
Physical data:
| Diameter | net 17mm |
| Wt/Metre | 1.44kg |
| Approx. failing load | 191kN |
| Max. safe workload | 127kN |
Thruty Sleeve: Tube
A rigid PVC tube of 2mm wall thickness, supplied in 2 metre lengths which can be easily cut to the required size. It is used as an expendable sleeve over tie bolts, facilitating their removal and also acting as a spacer to ensure correct width of wall.
| i/d mm | |||||
| 14/18 | 20/24 | 22/26 | 26/30 | 32/38 | |
Thruty Cones: Tube
Thruty Cones are used at the ends of the Thruty Sleeve and can be easily extracted after removal of the formwork, to form a chamfered recess for subsequent grouting.
| i/d mm | |||||
| 14 | 20 | 22 | 26 | 32 | 22 |
Tie Bar: Length in metres
| 7.5 | 6 | 2.5 | 2 | 1.75 | 1.5 | 1.0 |
Waler Plate: Type
| Standard & Heavy duty |
Also available
| Formwork Clamps |
| Flexible Hose |
| Adjustable Kickers |
All dimensions are in Millimeters unless otherwise stated.
Ellis Steel Group © 2011